Pard NV007 Scope Holder Tube Replacement Night Vision Kit This unit is designed to replace the Pard NV007S tube. PLEASE BE AWARE - THIS S VERSION DOES NOT FIT THE V VERSION PARD. THIS WILL NOT FIT THE PARD NV007 SP - THE NEW MODEL WITH VERTICAL BATTERY. NV007A/V adapters are available - HERE The USH-46 goes over the scope eye relief and requires minimum 20mm / maximum 45mm space. If you have an IR Illuminated switch at the eye relief end, check your measurements. This unit can be connected to 99% of the scopes from eye relief outer with dimension of 40mm to 46.5mm and it will find the centre automatically while you are tightening it. TOTAL length: 69mm Our pard ring length: 24mm Made of aluminium. Package includes: 1 x Universal scope holder USH-46 1 x pard Adaptor ring PR-007S 1 x Storage case 1 x Silicon grease tube Please note: The Pard 007 is NOT included. DOES NOT FIT THE 007A/V
£89.99
108 MOA One Piece Elevation Adjustable forward/Backward Picatinny 125 We have designed and developed an amazing new Picatinny mount.We are very proud of this product as its development resolves some issues for shooters, who depend on the reliability of a solid mount. This is the shorter version of the Original Pard Mount. 12.5cm Top Rail. Main benefits of using this mount: 1. NV scope:It can be directly fitted to the Pard 008 008P 008LRF ( will not fit NV008S ) 2. Adjustability:FULLY ADJUSTABLE, FORWARD or BACKWARD , ELEVATION, WINDAGE, EYE RELIEF AND HEIGHT ADJUSTMENT, that allows the scope to move vertically and horizontally along a guided path, and lockable in different positions, using 3x or 4x or 5x screws on the side of this mount. 3. Combined with a Scope cam:This mount allows users to adjust their scope forward, backwards, or adjust it vertically to align the scope with their eye relief or eye level.Users wishing to use their scope camera and record a session while shouldering their rifle, but the screen needs to be further to their eyes, or, for some applications they might require the camera to be closer to the eyes, such as pard/ Nightvision scopes etc. 4. Longer range shooting:long range before running out of adjustment on the turretsis the ability for users who need to reach out further but are restricted by their current mounting system.By keeping the front mount at it’s lowest and elevating the rear mount to the highest point you can zero in your gun far beyond, without using the clicks on your turrets, hence keeping the optical centre of your scope intact. 5. Multiple rifles:This system can be used to install scope mounts for the owner’s of multiple rifles who require to use one scope for all of their rigs by installing one Infinity mount to each rifle.They can zero then just swap the scope between them, with little need for turret click adjustment. 6. Durability:This product is robust enough to be installed on heavy recoil rifles, up to .308 caliber. Technical information for the new ‘INFINITY’ mount: Length: Top Rail 12.5cm / Bottom Piece 12.5cm / Rail Section 8cmProfile height from bottom of the mount to middle of the top picatinny rail, 21mm.Total height: 30.30mmAdjustable Height: 4.5mmWeight: 175 grams Product includes: 1x Infinity picatinny mount3 x Allen keys, (two different sizes)5 x side screws1x m5 spring screw4x pard 008 attachment screws1x Waterproof case Torque calculation:Adjustable side screws maximum torque,53-71 inch-pound force to 6-8 NM Newton Meters.Picatinny nuts maximum torque,53-71 inch-pound force to 6-8 NM Newton Meters.
£101.99
Eagle Vision Pard NV008 Mount - Windage + Elevation Adjustable Mini 125s This is the MINI version of the original Pard mount, only 12.5cm top rail size. Description: We have designed and developed an amazing new Picatinny mount.We are very proud of this product as it’s development resolves some issues for shooters, who depend on the reliability of a solid mount. Main benefits of using this mount: 1. NV scope:It can be directly fitted to the Pard 008 008P 008LRF ( Does NOT fit the Pard NV008S ) 2. Adjustability:FULLY ADJUSTABLE, FORWARD or BACKWARD , ELEVATION, WINDAGE, EYE RELIEF AND HEIGHT ADJUSTMENT, that allows the scope to move vertically and horizontally along a guided path, and lockable in different positions, using 3x or 4x or 5x screws on the side of this mount. 3. Combined with Scope cam:This mount allows users to adjust their scope forward, backwards, or adjust it vertically to align the scope with their eye relief or eye level.Users wishing to use their scope camera and record a session while shouldering their rifle, but the screen needs to be further to their eyes, or, for some applications they might require the camera to be closer to the eyes, such as pard/ Nightvision scopes etc. 4. longer range shooting:long range before running out of adjustment on the turretsis the ability for users who need to reach out further but are restricted by their current mounting system.By keeping the front mount at it’s lowest and elevating the rear mount to the highest point you can zero in your gun far beyond, without using the clicks on your turrets, hence keeping the optical centre of your scope intact. 5. Multiple rifles:This system can be used to install scope mounts for the owner’s of multiple rifles who require to use one scope for all of their rigs by installing one Infinity mount to each rifle.They can zero then just swap the scope between them, with little need for turret click adjustment. Technical information for the new ‘INFINITY’ mount: Length: 12.5cm / Base 12.5cm / Pic Rail 8cmProfile height from bottom of the mount to middle of the top picatinny rail, 21mm.Total height: 30.30mmAdjustable Height: 4.5mmWeight: 175 grams Product includes: 1x Infinity picatinny mount3 x Allen keys, (two different sizes)5 x side screws1x m5 spring screw4x pard 008 attachment screws1x Waterproof case Torque calculation:Adjustable side screws maximum torque,53-71 inch-pound force to 6-8 NM Newton Meters.Picatinny nuts maximum torque,53-71 inch-pound force to 6-8 NM Newton Meters.
£101.98
Pard NV007V Night Vision 12mm 1x Rear Add On - NEW LED Version Same Pard quality - just improved. This is the NEW upgraded LED IR version as of Dec 2023 The Pard NV007V Series Rifle Scopes Attachments have been designed to be highly performance and portable devices able to attach and work well with most rifle scopes. This makes the NV007V a great choice for vermin shooters working on a budget. The NV007V features a high definition OLED 1024 x 768 screen capable of offering images and footage with incredible clarity as well as accurate colours. The scope can record as well to the expandable storage so the important moments are not forgotten, this can be expanded up to 128GB. In addition to this a further feature of Wifi Connectivity allows the scope to be linked to mobile devices enabling control on the fly as well as a further display. AIRGUN 101 SHOP recommends ONLY charging the battery using an external charger. The 18650 batteries are powerful, if it overheats during charging in the unit it may damage the unit - we recommend better safe than sorry. High Definition OLED 1024X768 Screen Wifi Connectivity / Smart Phone Control Hd Video Recording Function 1920x1080 Full HD Sensor Upto 128Gb External Storage 45mm Scope Adapter Comes with 3 spacers to help fitment to scope PARD NV007V LED 12mm 1x Magnification 1-7x Eye Relief 35mm Eyepiece Resolution 1024x768px IR Illuminator Yes IR Power 5w IR Wavelength 850nm LED IR Detecting Range 300m Photo Capture Yes Video Capture Yes Wifi Smart Phone App Yes Photo Resolution 2592x1944 Video Resolution 1920x1080 (FHD) Video Format AVI Dimensions 135mm x 56mm x 100mm Storage Method TF Card Battery Type 18650 Li-ion 3D Gyroscope No E-Compass No Battery Life Upto 8 hours Weight 250g Adapter Sizes 45mm/48mm ships with 45mm only FEATURES • High Definition OLED 1024X768 Screen • Wifi Connectivity / Smart Phone Control • USB-C Charging Interface • 1920x1080 Full Hd Sensor • Hd Video Recording Function / High Res Photos • Upto 128Gb External Storage • 45mm Scope Adapter (48mm sold separately) * To meet British Standards this model no longer ships with a Red Dot Laser Sight. The IR unit is unaffected by this change. Eaglevision attachments marked as V compatible will fit, however we recommend a small amount of the Pard tape on the rim of the connector to help remove a tiny amount of play.
£299.99£284.99
Please confirm that you are 18 years or older to enter the shop.
You are not old enough to visit the shop yet.
