Airgun and Rifle tools to help repair and keep your rifle or pistol is the best condition.
Tools
Wheeler Engineering Wheeler Professional Reticle Leveling System (PRLS)
Wheeler Professional Reticle Leveling System (PRLS) Level Your Scope like a Pro - Got Good Glass? Then set it up right. The Wheeler Engineering Professional Reticle Levelling System (PRLS) is a precision tool and technique designed to allow a scope to be perfectly levelled on any firearm with ease. CNC machining, factory adjustment calibration set screws, anodised aluminium construction and a protective moulded case put the PRLS in a class of its own. The system is comprised of two machined aluminium level housings calibrated to their integrated levels. The Barrel Clamp Level is attached to the guns barrel while the smaller Reference Level is placed on scope base, bottom half of a ring or other flat surface perpendicular to the vertical axis of the gun. The gun is then rotated until the Reference Level is aligned. The tuning adjustment knob on the Barrel Clamp Level is then turned until its level is centred to match the Reference Level. At this point the Barrel Clamp Level is calibrated to the guns axis. The scope can be installed loosely and the Reference Level placed on top of the scopes turret cap. The scope is rotated until the Reference Level is aligned with the Barrel Clamp Level and then simply secured in place. The Wheeler PRLS is the most effective instrument available for precision scope alignment.
£79.99£75.99
-
Wheeler Engineering Wheeler FAT Torque Wrench With 10 Bit Set
Wheeler FAT Torque Wrench With 10 Bit Set Wheelers FAT Wrench brings perfect consistency to every screw on your rifle! This amazing handheld torque wrench lets you apply repeatable, accurate torque settings to scope rings, guard screws and other screws, which aids in accuracy and decreases the opportunity for problems in the field. The FAT Wrench is a perfect compliment to the Deluxe Gunsmithing Screwdriver Sets. Together, they can ensure accurate tightening of most every screw on any gun in your collection. Bits are made from S2 Tool steel and hardened to 56-56 Rockwell "C" Torque adjustment range from 10 inch/pounds to 65 inch/pounds Accuracy plus/minus 2 inch/pounds up to 40 inch/pounds; 40-65 is /- 5% Convenient storage case included This video is from a third party Reviewer and is not connected with Airgun 101 Shop...but it might give you some idea of the prodcuct.
£89.99£79.99
-
Wheeler Engineering Wheeler Precision Gunsmith Micro Screwdriver Set
Wheeler Precision Micro Screwdriver Set Gunsmith Screwdriver set, with all the micro heads for the majority of requirements when it comes to taking care of your gun. 58 piece set with an organized carry/storage case Chrome plated steel bits Extendable handle from 3-3/4" to 5-1/2" 5-3/4" flexible extension shaft Bits are precision formed for maximum fastener engagement Individual bit markings Once opened this is a non-return product.
£34.00
-
MTM Gun Maintenance MTM Case Guard Portable Rifle Maintenance Center RMC - 1 - 30
PORTABLE RIFLE MAINTENANCE CENTER - RMC-1-30 Ideal for holding your airgun to mount scopes, clean and store all the bits in the handy trays below. We use these all the time and Giles uses this to set all his airguns up. It also travels well in cars and is ideal to take to the range. From the MTM Website - Designed to be taken to the shooting range for easy cleaning and maintenance of rifles, muzzle loaders and shotguns. Top benchrest shooters clean their barrels every 5 to 7 shots, and that is with a broke in barrel. Most rifle manufacturers recommend you lightly clean your barrel before the first shot. A lot of hunters ruin the potential of their new hunting rifles with the first box of ammo they run through it. Everyone should read about the proper way to break in a new rifle barrel.The Rifle Maintenance Center 1 is a portable convenient all-in-one solution to all your gun cleaning needs. It comes with two forks that ""pop out"" and can be stored in one side of the base, leaving room for cleaning supplies on the other. The forks are over molded with rubber for protection of your firearm and can hold your cleaning rods. It features sliding dust covers to protect your equipment and keep everything clean while using and secure inside. You can also use it to mount scopes, swivels, bedding of actions and more, making it the ultimate gun cleaning kit! Dimensions: 23.3” x 11” x 3.75” with the forks tucked inside.Weight: 3.9 pounds
£64.99£57.98
-
Wheeler Engineering Wheeler Space Saver Gunsmith Screwdriver Set
Wheeler Space Saver Screwdriver Set Less than half the size of comparable gunsmithing screwdriver sets, the Wheeler Space Saver Gunsmithing Screwdriver Set takes up very little space on your bench, but contains a durable and comprehensive set of 26 bits chosen to meet most of your gunsmithing needs. Its also the perfect size to include on your trips to the range and the field. Included with the standard, Phillips, hex, and torx bits, is a 2 long 2 Phillips bit which is ideal for recoil pad installation, and a hex-to-square conversion bit which allows you to use 1/4 square drive sockets and other attachments. The magnetic handle is perfectly sized for gunsmithing needs, allowing you to carry a variety of bits if the need should arise. Includes a selection of the same high quality bits found in the Professional Gunsmithing Screwdriver Sets Includes standard Phillips, hex and torx bits 1-2" long 2 Phillips but which is ideal for recoil pad installation 1 hex-to-square conversion bit which allows you to use 1/4" square drive sockets and other attachments 1 magnetic handle is made of comfortable overmolded plastic
£22.00
-
Wheeler Engineering Wheeler FAT Digital F919 Wrench
Wheeler FAT Digital F919 Wrench Wheelers Digital F.A.T. Wrench brings even more precise torque settings to the handheld torque wrench market. This amazing digital handheld torque wrench lets you apply repeatable, accurate torque settings to your scope rings, bows and other screws. The audible and visual indicators let the user know exactly when the desired torque setting has been achieved. The large range of 15-100 in/lbs. will aid in accuracy of all your screws and decreases the opportunity for problems in the field. The FAT Wrench Bits are built to last and are made from S2 tool steel and hardened to 56-56 Rockwell C. Bits are made from S2 Tool steel and hardened to 56-56 Rockwell "C" Ergonomic over molded design Large LCD Digital display for ease of viewing Audible indicator tone Full set of bits included This video is from an Australian Video Reviewer and is not connected with Airgun 101 Shop...but it might give you some idea of the prodcuct.
£119.99
-
Jack Pyke Gun Matt - AR15 Diagram
Gun Matt - AR15 Diagram Ideal for your repair bench to help protect your rifle or gun while you work on it. Black with white text print Material: 3mm RUBBER backing, soft touch front. Dimensions (cm): 89 x 29 Arrives rolled up
£12.95
-
Wheeler Engineering Wheeler Level-Level-Level
Wheeler Level-Level-Level The Wheeler Engineering® Level-Level-Level is the simplest, most accurate scope leveling system out there. Misaligned crosshairs rob you of accurate bullet placement, especially at long range, where it counts. Crooked crosshairs cause your scope adjustments to be unreliable and even make zeroing your firearm a frustrating and costly experience. The Level-Level-Level works because the scope is leveled to your receiver, not to the top of a scope base. This scope mounting level works with practically any bolt-action rifle and is adaptable to there designs as well.
£30.99£25.99
-
Jack Pyke Pistol Mat - Glock Diagram
Pistol Mat - Glock Diagram Ideal for your repair bench to help protect your rifle or gun while you work on it. Black with white text print Contains; Production History, Specifications, Overview, Operating Cycle, Disassembly, Component listBlack with white text printMaterial: 3mm RubberSize: 50 x 37 cm Arrives rolled up
£9.50
-
Wheeler Engineering Wheeler 2023 Digital FAT Wrench
Wheeler 2023 Digital FAT Wrench Wheelers Digital F.A.T. Wrench (Firearm Accurizing Torque) brings precise torque settings to the handheld torque wrench market. This digital handheld torque wrench lets you apply repeatable, accurate torque settings to scope bases and rings, action screws, and more. The audible and visual indicators let the user know exactly when the desired torque setting has been achieved. The large range of 15-100 in-lbs. will aid in accurately torqueing screws to recommended specifications. The Digital F.A.T. Wrench includes 10 bits built to last, made from phosphate-coated S2 tool steel hardened to 56-58 Rockwell C. The included custom-molded case is perfect for storing the wrench and bits when not in use. Main Features Covers a wide variety of common gunsmithing tasks. LCD screen features live and peak modes for measuring torque. Torque adjustment range of 5-100 in-lbs. Covers a wide variety of common gunsmithing tasks including low torque red dot sights. Lcd screen features live and peak modes for measuring torque. Audible and visual indicators when desired torque is reached. Rubberized handle improves ergonomics for enhanced comfort and grip, reducing hand strain and fatigue. Hollow-ground flat bits create a precise fit to prevent damage to screws and firearms. Phosphate coating on bits and shaft prevents rust and corrosion. Premium latching hard case organizes and protects contents, keeping them secure and protected during transport and storage. This video is from an Australian Video Reviewer and is not connected with Airgun 101 Shop...but it might give you some idea of the prodcuct.
£128.99
-
Jack Pyke Gun Matt - AK47 Diagram
Gun Matt - AK47 Diagram Ideal for your repair bench to help protect your rifle or gun while you work on it. Black with white text print Material: 3mm RUBBER backing, soft touch front. Dimensions (cm): 89 x 29 Arrives rolled up
£12.95
-
Donny FL Edgun R3M and R3 Degasser Tool M39
Edgun R3M and R3 Degasser Tool M39 Product description This tool makes degassing the Edgun R3M and R3 safe and easy. It also acan also be used to pull out the regulator. Instructions: before screwing the tool onto the Edgun, back out the screw a little to allow the valve pin to go into the tool. screw the tool onto the valve Using the blue knob slowly screw into valve pin. You'll start to hear a hissing noise and that's the air being released. once empty, your gauge should be down to zero to remove the regulator, make sure the gun is completely empty. Unscrew the screws holding the regulator in place. Once all the screws are out, screw the degasser tool onto the valve and pull it out of the air tube WE SUPPLY NO INSTRUCTIONS, THE ITEM ARRIVES IN A CLEAR BAG - WE ARE NOT RESPONSIBLE FOR ANY HARM OR DAMAGE TO YOU OR ANY OTHER PERSON OR ITEM WHEN USING THIS PRODUCT.
£55.00
-
Wheeler Engineering Wheeler Trigger Pull Scale
Wheeler Trigger Pull Scale The Wheeler Trigger Pull Scale accurately measures trigger pull weight from 8 ounces to 8 pounds. It features an ergonomically shaped handle for consistent direction of pull. Highly visible increment markings and easy to read sliding indicator that stays on the maximum weight registered make it easy to read. It measures in 2 ounce increments and is accurate to /- 2 oz. The trigger pull scale is an excellent tool for use when adjusting triggers to ensure accuracy and maintain safe performance. Accurately measures trigger pull Measures in 2 oz. increments Accurate to /- 2oz. Easy-to-read sliding indicator Range from 8 oz. to 8lbs
£35.99
-
Wheeler Engineering Wheeler FAT Torque Wrench 2023 - New Version - With 10 Bit Set
Wheeler FAT Torque Wrench 2023 - New Version - With 10 Bit Set Wheelers F.A.T. Wrench (Firearm Accurizing Torque) brings perfect consistency to every screw on your rifle. This amazing, handheld torque wrench lets you apply repeatable, accurate torque settings to scope bases and rings, action screws, and more. This prevents damage to optics and firearms, and decreases the chances of failure in the field. The large range of 10-65 inlbs. will aid in accurately torqueing screws to recommended specifications. The F.A.T. Wrench includes 10 bits built to last, made from phosphate-coated S2 tool steel hardened to 56-58 Rockwell C. The included custom-molded case is perfect for storing the wrench and bits when not in use. Various Size Heads 3 x Flat 3 x Hex 3/32" - 5/32" 1 x Adapter 1/4 Drive 2 x Torx T15 / T20 1 x Specialty Leupold Scope Base This video is from a third party Reviewer and shows the older wrench - you get the idea - the video is not connected with Airgun 101 Shop...but it might give you some idea of the prodcuct.
£96.99£94.99
